For those with a Intel Mini...

[Bradleylicious]

I was having a ton of issues with the installation freezing after choosing the Windows flag. It seemed as tho it would sit there for way longer than 2-3 mins...

I decided to try another XP disk... I used a RETAIL copy of Windows XP Sp2... and then I used the following XOM.efi file...

Now I am able to get through patching, and I am currently formatting Partition 2 to NTFS Slow...ie: not quick...

I will update this thread upon completion... Fingers are crossed...

[Steve1496]

Where did you get that xom.efi? It looks like the alpha one I posted which is meant for 20" iMacs and will freeze at Setup is copying files.

[Bradleylicious]

Where did you get that xom.efi? It looks like the alpha one I posted which is meant for 20" iMacs and will freeze at Setup is copying files.

I don't remember, but you are right, this one freezes at that exact spot... Did you use a different xom.efi File?

[Steve1496]

Yeah it is the one I posted...you probably won't get anywhere with it yet..sorry!

edit: yes me and blanka created this last night after finding the 20" iMacs fill size. This at least got VGA working. I'm surprised it works on the mini at all though.

[Bradleylicious]

yes this is the one he posted... So to confirm...it wasn't an issue with my eif file...but rather my install disk...

[ampmhoodlum]

I would say this is the one you posted steve. If the open it. The modified date/time is the same.

[Steve1496]

Try this attached xom.efi. I got it from the Tester's forum and a Mac Mini tester reported it works.

[Steve1496]

anyone test this on a 20" imac?


I don't think they have. Want to try it?;)

[ampmhoodlum]

anyone test this on a 20" imac?

[Steve1496]

tested. No Video. Just text with it


As expected.

[ampmhoodlum]

I don't think they have. Want to try it?;)

tested. No Video. Just text with it

[Bradleylicious]

It just hangs for me... But I am thinking... I have already formated to NTFS now... do I have to go back and reformate the "xp" partition to FAT32 in OSX?

[ampmhoodlum]

It just hangs for me... But I am thinking... I have already formated to NTFS now... do I have to go back and reformate the "xp" partition to FAT32 in OSX?

You shouldn't have to reformat. Did you rebless the system with the new file? Or just place in in the directory? And where is it hanging at?

[Steve1496]

-Sudo CP to /System/Library/CoreServices and Rebless with new xom.efi
-To be on the safe side, I would actually format the XP partition. Setup may have left files there you don't want there again.
-Reboot and try again. As a consequence on the mini, the CSM does take a little over 3 minutes (disregard what you've heard about 2 minutes).

[Bradleylicious]

You shouldn't have to reformat. Did you rebless the system with the new file? Or just place in in the directory? And where is it hanging at?

yeah I reblessed... I just hit enter and it went further, then froze before patching.. Then a few mins later i hit enter again, and it patched fine this time.. Now it looks like it is setting up some files...but the video is now HUGE, as compaired to what it was last time when the setup froze...

[Steve1496]

yeah I reblessed... I just hit enter and it went further, then froze before patching.. Then a few mins later i hit enter again, and it patched fine this time.. Now it looks like it is setting up some files...but the video is now HUGE, as compaired to what it was last time when the setup froze...


Please let me know if this works.

[Bradleylicious]

Please let me know if this works.

yeah it works, but the video screen is off centered, and i left the room for a bit, and now the screen is blue and froze... i am going to reboot and see what happens...

[Bradleylicious]

Alright windows is at the setup screen...but it is way off center, so I can't continue through to windows... Even the selection screen for windows or mac is off center...

[Steve1496]

Alright windows is at the setup screen...but it is way off center, so I can't continue through to windows... Even the selection screen for windows or mac is off center...


Not good..I'm not sure what to think of here..Can you take a picture?

[Bradleylicious]

Not good..I'm not sure what to think of here..

Well I was able to get through it all by guess and check... now I have XP installed...but the only display option is 1280x1024... My moniter maxes out at 1024x768, or maybe one step higher... is there any way to change this...

[Steve1496]

Well I was able to get through it all by guess and check... now I have XP installed...but the only display option is 1280x1024... My moniter maxes out at 1024x768, or maybe one step higher... is there any way to change this...


So XP is not displaying off center though? If your monitor supports it, make the picture smaller using your monitor's menu or use AutoAdjust.

[Bradleylicious]

So XP is not displaying off center though? If your monitor supports it, make the picture smaller using your monitor's menu or use AutoAdjust.

Yeah just tried that... XP is cut... the bottom 1/5 th of XP can't not be seen... So Because when i boot the mini i get the choice and that is off center, is this an issue with the .efi or is this an install issue...

[Snub_Fighter]

Id assume its the efi, as thats the only thing thats been changed to get it installed and thats what controls the boot..or so i assume

[Steve1496]

But OS X is still booting at the correct resolution?

And hey, look at the brightside, at least we got your XP installed! Obviously it's not usable at this point, but we found part of the problem.

As a last resort you can try to reinstall XP.

[Bradleylicious]

But OS X is still booting at the correct resolution?

And hey, look at the brightside, at least we got your XP installed! Obviously it's not usable at this point, but we found part of the problem.

As a last resort you can try to reinstall XP.

Yeah atleast XP is installed.. OSX boots fine... but the boot screen is def off center...i assume it is in the same Resolution as the XP partition... Any ideas on a fix?

[ampmhoodlum]

now we just need to get the 20" imac to work lol

[Bradleylicious]

now we just need to get the 20" imac to work lol

I agree.. :P

[Steve1496]

Yeah atleast XP is installed.. OSX boots fine... but the boot screen is def off center...i assume it is in the same Resolution as the XP partition... Any ideas on a fix?


Actually...I just thought of something. Since your xom.efi is not a modified one, not sure if this will work, but you can try it:
Turn on your mac. When you turn it on, scroll to the Windows logo. Do NOT hit enter. Press F4 then F7.

If it worked correctly, you should see X Resolution [some value here]:
type in your correct resolution (1024). Hit enter. Do the same for Y, change it to 768.

Leave the rest of the values as is by just hitting enter (framebuffer, scanline, video card, etc).

[Bradleylicious]

Actually...I just thought of something. Since your xom.efi is not a modified one, not sure if this will work, but you can try it:
Turn on your mac. When you turn it on, scroll to the Windows logo. Do NOT hit enter. Press F4 then F7.

If it worked correctly, you should see X Resolution [some value here]:
type in your correct resolution (1024). Hit enter. Do the same for Y, change it to 768.

Leave the rest of the values as is by just hitting enter (framebuffer, scanline, video card, etc).

Hitting F4 gives me:

XpOnMac Starte. (C) JLA 2006
Screen Enabled...

but I can't hit F7....

[Snub_Fighter]

I was sposse to take the install disk out after the first half right?? How long does it take after the first reboot to get the second part??

[Steve1496]

Hitting F4 gives me:

XpOnMac Starte. (C) JLA 2006
Screen Enabled...

but I can't hit F7....


I'll be able to help you with this later tonight by sending you some stuff but I won't be back for a few hours. In the meantime maybe try reinstalling XP and see if that works because you'll have time to do so before I'm back. If that works great if not PM me.

[Bradleylicious]

I was sposse to take the install disk out after the first half right?? How long does it take after the first reboot to get the second part??

I am assuming you have patched, and setup the NTFS on partition 2...

After that I had to pop out the cd...and then when it booted to continue the install for windows, I had to put it back in...

[Snub_Fighter]

hhmm im stuck at a 2000:0efe: int 13_48... :|

[Bradleylicious]

hhmm im stuck at a 2000:0efe: int 13_48... :|

What flavor Xp are you using... i was stuck there once upon a time... I had to use a RETAIL copy of XP...

[Snub_Fighter]

its an oem xp pro sp2...

gonna take a break for awhile been at work playing with it all day, just got home lol....

Oh yeah you using a solo or a duo cause im using a duo - not that it should matter but just checking..

[Bradleylicious]

its an oem xp pro sp2...

gonna take a break for awhile been at work playing with it all day, just got home lol....

Oh yeah you using a solo or a duo cause im using a duo - not that it should matter but just checking..

I too am on a duo...but your problem is the OEM disk... You need a RETAIL disk...

[Snub_Fighter]

shouldn't matter there should be no difference the only difference between and oem and a retail is the retail comes with all the books...

I did have a bit of an issue with some of the files not getting copied over right away so im gonna reburn a disk.

[Bradleylicious]

shouldn't matter there should be no difference the only difference between and oem and a retail is the retail comes with all the books...

I did have a bit of an issue with some of the files not getting copied over right away so im gonna reburn a disk.

I thought the same thing, but i was in the same boat as you... changed to a retail copy... no more issues... None the less I wish you luck, keep us posted...

[Snub_Fighter]

I sure will, gonna get this thing working sooner or later :D

[Snub_Fighter]

Alright got it to the second part after I reburned with new copied files from my oem version xp pro sp2 disk applied the patch and all that jazz... anyways reinstalled windows no currupt files this time and it rebooted into the second part and is continuing as I type this. :D

[Bradleylicious]

Alright got it to the second part after I reburned with new copied files from my oem version xp pro sp2 disk applied the patch and all that jazz... anyways reinstalled windows no currupt files this time and it rebooted into the second part and is continuing as I type this. :D

Question for you... you were able to install windows... what EFI file are you using...the one I have makes the screen off centered... Did you use the one posted in this thread...

...What are you specs again?

I am on a Duo 1.67, 80gig, 512...

[Snub_Fighter]

have to check the box i was just giving the mini at work and i was glad to get windows on it.. i used the one from this thread that u used and i didn't have to adjust my crt monitor much at all to get it in the middle



same specs as yours.

[Bradleylicious]

Odd... I don't know why my screen is all messed up...

[Bradleylicious]

well my crt is odd even when its connected to a windows machine so... no clue if I had a normal one to check I would do that.. it was weird on a big lcd screen at work so might just be my crt is odd.. do you know of any ethernet drivers i could get my hands on for the mini?

Don't think anyone has found them yet, only wifi... Did you get video drivers working...

[Snub_Fighter]

well my crt is odd even when its connected to a windows machine so... no clue if I had a normal one to check I would do that.. it was weird on a big lcd screen at work so might just be my crt is odd.. do you know of any ethernet drivers i could get my hands on for the mini?

[Bradleylicious]

well my crt is odd even when its connected to a windows machine so... no clue if I had a normal one to check I would do that.. it was weird on a big lcd screen at work so might just be my crt is odd.. do you know of any ethernet drivers i could get my hands on for the mini?

Actually you should probably check out this page...

http://wiki.onmac.net/index.php/Drivers

[Snub_Fighter]

wifi works where can I pick that up.

thanx for the link..

Now the big issue at hand is video drivers....

gonna give the dev drivers a shot instead of the regular ones see if that makes a difference

[AmazingRando]

Try this attached xom.efi. I got it from the Tester's forum and a Mac Mini tester reported it works.

Steve - you are the man!! Like Dr. Frankenstein I jumped up and yelled, "It's alive!!!" I had to use the F6 trick to get it to work, but the install did work. :D

Now, just to get ethernet and graphics working.

On a side note, without installing drivers it recognized my USB-SPDIF adapter (Turtle Beach Avantage Micro) and I have audio. w00t!!

:eek:

Incidentally, I did my install with WinXP SP2 OEM (not retail) volume license pack. Also of note is that I'm on a Mac Mini Core Solo

[Steve1496]

Steve - you are the man!! Like Dr. Frankenstein I jumped up and yelled, "It's alive!!!" I had to use the F6 trick to get it to work, but the install did work. :D

Now, just to get ethernet and graphics working.

On a side note, without installing drivers it recognized my USB-SPDIF adapter (Turtle Beach Avantage Micro) and I have audio. w00t!!

:eek:

Incidentally, I did my install with WinXP SP2 OEM (not retail) volume license pack. Also of note is that I'm on a Mac Mini Core Solo


Congrats! Glad it's working for you!

[drethernet]

Hi all, I'm just finishing the installation on a Mac Mini Duo Core which was tricky since I only see the 2/3 of the screen and my mighty mouse was not working during the installation. Any ideas why all this is happening?
BTW, Steve thanks for the fixed EFI file. Before that I was stuck at the "Copying files" part of the setup.

[Bradleylicious]

Hi all, I'm just finishing the installation on a Mac Mini Duo Core which was tricky since I only see the 2/3 of the screen and my mighty mouse was not working during the installation. Any ideas why all this is happening?
BTW, Steve thanks for the fixed EFI file. Before that I was stuck at the "Copying files" part of the setup.

Well a quick fix would be...set the Screen Res in OSX to be 1280x1024... and then reboot...you should be in good shape...

[Steve1496]

After it finishes copying files, Setup should go full screen.

[drethernet]

Unsuccesful here. Setup finished and after "Saving files" I got hunged up as the HOW TO described, restarted but the boot loader stops:
"Int 13 called from 2000:0711. GDT=.............", etc
I get a dot after that and nothing happens...

[drethernet]

OK, pressing g and enter a couple of times, as suggested in the related thread, worked! Im in XP at the moment!

[mr breaker]

What does pressing 'g' and enter do?

This is happening to me now. I have to hit g and enter twice now everytime I start up XP for it to boot. This is happening after a successful install.

[mr breaker]

This is the screen I get that hangs until I hit 'g' and enter twice:

http://www.rorybreaker.com/z_temp/xp_boot.jpg

[gsebastien]

Hello,

I have the same problem with the new xom file for the macmini.
The install start and copy all the files.
After it reboot the computer and go in the same screen has in the previous post.
I have tried to do the g and enter trick a lot of time.
But it doesn't work, I still hang on the shell prompt.

I have started from zero, delete and re create the C partition and format it with the install xp disc, the result is always the same.
What can I do ??
Thank you for your help.

Same problem for other macmini user on this webpage http://forum.osx86project.org/index.php?showtopic=12244&st=20

[mr breaker]

Hello,

I have the same problem with the new xom file for the macmini.
The install start and copy all the files.
After it reboot the computer and go in the same screen has in the previous post.
I have tried to do the g and enter trick a lot of time.
But it doesn't work, I still hang on the shell prompt.

I have started from zero, delete and re create the C partition and format it with the install xp disc, the result is always the same.
What can I do ??
Thank you for your help.

Same problem for other macmini user on this webpage http://forum.osx86project.org/index.php?showtopic=12244&st=20


Did you set your resolution in OS X to 1280x1024 first?

Try that.

[arnoud]

I have been trying to get XP installed for a few hours on my mini, but somehow it won't start the 2nd phase of the XP install.

First the setup:
- Mac mini Core Duo, 2GB RAM, internal HD partitioned to 30GB (for XP) and 40GB (for OSX), Apple Cinema Display HD 23", USB keyboard, Mighty Mouse

I have installed the mini xom.efi file and blessed the folder. Upon restart I get the Apple logo/windows logo, slightly offset to the top left. If I select windows + enter and just let the mini sit, nothing happens. I have to keep F6 depressed quite a while until it finally starts the patching part and starts the installer.

There I select the 2nd partition (the 30GB one) and format it (tried all options (FAT32 and NTFS, fast and slow). Then the installer starts copying and a few minutes later it restarts itself when it has reached 100%.

Then I get the Apple logo again and I select the win logo and hit enter. The logo changes to a grey Windows logo and just sits there. I let it sit for over 10 minutes, nothing happens. (Hitting enter also does nothing).

Rebooting and hitting F4 at the Windows logo + enter shows me the following:

XpOnMac started. (C) JLA 2006
GDT Address: 7EDED9C0 Limit: 0000003F
Creating 16-bit code selectors 30, 38
krnIDT: 7C6B4AA0
Hard drive detected: Acpi(PNP0A03,0)/Pci(1F|2)/Ata(Primary,Slave)
mbrUpdate: GPT defines 128 partitions. mbrUpdate will only mimic the first four partitions.
mbrUpdate: Partition #0 - Type EF 00000028 - 00064027
mbrUpdate: Partition #1 - MSDOS 00064028 - 03CC02B7
mbrUpdate: Partition #2 - Type AF 03CC02B8 - 094CF887
mbrUpdate: Partition #3 - Empty
mbrUpdate: Update at 7C769F40
CD-ROM detected: Acpi(PNP0A03,0)/Pci(1F|1)/Ata(Primary,Master)
Open(floppy.img): Not Found
FLOPPY: No floppy image (floppy.img) found
CDROMBoot: Unable to read block 00000011: No Media
HDBoot: Found active partition #1
HDBoot: Found valid boot sector on partition #1. Booting...

and after that... Nada nothing...

What I find strange is when I reboot into OSX, the XP partition is completely empty! Shouldn't there be Windows setup files on the HD??

any ideas?

[Bradleylicious]

I am having an identical issue, and am using the same efi file... But yesterday, I was not having this trouble, and I could boot fine...

[jlmodell]

crap...... i fudged my install by installing some drivers that froze in the middle of installation.

i have the same issue now... i suppose starting from scratch.. AGAIN.. will solve it.. i wish osx didn't take so long to install =\

[patty_b]

Am I the only one who is unable to download the MacMiniXom.zip file? When I click the link to download it, I get a prompt to login. I login and it asks me to do it again.
Thanks in advance,
patty_b

[53528]

havin troulbe, so after i select the windows logo it only takes less than 5 seconds and i get this screen where it hangs i have tried the f6 trick and that didnt work. i am on a mac mini core solo. and this is the screen i get stuck at.

XpOnMac started. C JLA 2006.
GDT Address: 1EDEDD9C0 Limit: 0000003F.
Creating 16 bit code selectors 30, 38
krnIDT:1C6D3AA0
Harddrive detected: Acpi(PNP0A03,0)/Pci(1F12)/Ata(Primary,Slave)
mbrUpdate:GPT defines 128 partitions. mbrUpdate will only mimic the first four partitions.
mbrUpdate: Partition #0 - Type EF 00000028-00064027
mbrUpdate: Partition #1 - MSDOS 00064028-03847E67 ERASING!!
mbrUpdate: Partition #2 - Type AF 03847E68-06F87C57
mbrUpdate: Partition #3Empty
mbrUpdate: Update at 1C788F40
CD-ROM detected: Acpi(PNP0A03,0)/Pci(1Fl1)/Ata(Primary,Master)
Open(floppy.img): Not Found
FLOPPY: No Floppy image (floppy.img) found
CDROMBoot: Booting LBA 607 @07C0:0000L2000
2000:0E1E: int 13_4B
2000:0EEE: int 13_48


any help is greatly appreciated.

[mlazy]

Hey 53528,

I had the same prob. Someone on the forums suggested hittin F6a few times while the cd was still spinning. Once it spins down, hit enter a few times. From there I was off and running.

[53528]

Thanks for the help but still no luck. while pressing f6 the drive does stop spinning after a little over 30 seconds like it suppose to, and i start hitting enter but it still does not do anything, after about 1 minute after the drive stops spining the hard drive stops running as well. I am really stumped here, any other ideas?

[aimbuster]

Thanks for the help but still no luck. while pressing f6 the drive does stop spinning after a little over 30 seconds like it suppose to, and i start hitting enter but it still does not do anything, after about 1 minute after the drive stops spining the hard drive stops running as well. I am really stumped here, any other ideas?

What I did was hold F6 and when the cd stops spinning, I hit enter. Also make sure you're using the mini specific xom.efi and change your resolution under OSX to 1280x1024.

[mlazy]

53528,

when you push F6 does more text appear after:

Open(floppy.img): Not Found
FLOPPY: No Floppy image (floppy.img) found
CDROMBoot: Booting LBA 607 @07C0:0000L2000
2000:0E1E: int 13_4B
2000:0EEE: int 13_4B

Each time I press F6 a few more lines get added to the above, and the int switches to "int 13_48"

[53528]

I just want to start by saying thanks for the really quick responses. But no luck yet i got the resulution and am hitting f6 and enter After the cd stops spinning and the xom i am using is the second one listed on the first page of this thread. no text is added after "2000:0EEE: int 13_48" when hitting f6 and enter. any other ideas

[mlazy]

Sorry if this hasn't helped so far.

did you install this xom.efi file and rebless it already?

http://forum.onmac.net/attachment.php?attachmentid=7&d=1142634859

This is listed on the first page of this thread by Steve1496

That is the xom.efi that I am using.

[Frischluft]

I have the same problem width a german xp version with an adjusted TXTSETUP.SIF. This is on a cdrw. Strange is that i had the exact cd without the adjsuted txtsetup.sif on a regular cd that worked and still does. Unofortunatly i just can't install from that due to the wrong txtsetup..... I reburned the cdrw and tried again with no luck.... this time however right after hitting return on the windows icon the process halts with some 'int 21 called from bla bla' message. I think I'm going to try and burn a regular cd again, cause I'm desperate....


*edit*
Aparently my saved project had the wrong image file linked to. After pointing it back to the boot.img file the cdrw works now. This is a bit strange since I'm sure i saved the project right after burning the first working cd. Maybe something to doublecheck for you...

[performahhh]

I can't download the new xom.efi - I keep getting the login page over and over again, implying that I don't have permissions to download the file. Obviously my login works, because I'm posting this.

Sorry if this hasn't helped so far.

did you install this xom.efi file and rebless it already?

http://forum.onmac.net/attachment.php?attachmentid=7&d=1142634859

This is listed on the first page of this thread by Steve1496

That is the xom.efi that I am using.

[Onimaru78]

I can't download the new xom.efi - I keep getting the login page over and over again, implying that I don't have permissions to download the file. Obviously my login works, because I'm posting this.

Bump. Same exact behavior here.

[mlazy]

Sorry guys, I'm at work and don't have access to the file. Maybe someone can pm Steve?

Here's another link:

http://forum.onmac.net/showpost.php?p=871&postcount=7

Good Luck!

(Ignore this link, it's just a reference to the file you all can't get to.) Sorry.

[Snub_Fighter]

just log in and then it will pop up the dl for you to hit save or run or what ever you choose... it seems weird but it gets you where you want to go, just use your forum name and password

[cseda]

I can not dowload the file

[womm]

Success on the Core Solo Mini. Thanks to all who posted the solution and helpful advice.

I worked off a Volume License version of English SP2 and the MacMini XOM.EFI. Had to hold down the F6 key (just before text screen) until patching was successful and CD stopped. Then hit the ENTER key. After that got into the XP partition screen and all worked smoothly without a hitch from there. XP even rebooted itself after finalizing the installation (no hanging and manual power down like the instructions).
I used Fat32 for my XP partition, and also set the resolution to 1280x1024 first from OSX.

Some minor issues after installation
- sometimes the Mini's power LED does not come on booting into either OS.
- setting resolution below 1280x1024 in OSX and then rebooting into XP (no powering off) screws up XP's screen size (viewing just a corner of the desktop)
- XP shutdown requires Mini to be powered off manually, also no standby from XP (have not installed chipset drivers yet, maybe that will help)

Good luck to others...

[zgonda]

I've successfully installed XP on my Mini coresolo but it won't boot with the HD when I select it at the start of the mac (I have installed XOM.EFI 15 or 16 March version). What happens, please ? (partition problem ? ntfs or fat32 must be used ?) Thank you for all that you do.

[performahhh]

just log in and then it will pop up the dl for you to hit save or run or what ever you choose... it seems weird but it gets you where you want to go, just use your forum name and password

No, that DOES NOT WORK. I keep getting the "vBulletin Message" that I need to log in, over and over again. Can someone PM me the file or repost it in another message, please?

ADDED: Discovered the problem. You must use a PC to download the file; this forum is incompatible with Safari. How stupid is that?

[wallybear]

You can easily download it using another browser: I did it with Camino (http://www.mozilla.org).

The problem is related to a site incompatibility with Safari. :rolleyes:

[tindeutchen]

After a basic XP install the core duo mini hooked to a viewsonic 19" monitor has no problems with resolution, shifting of the screen image off center of the monitor, or the int 13 hang on restart listed several times above, etc... bring the mini home, hook it up to a sony trinitron 17" monitor and the resolution gets hosed, the screen gets shifted off center and the int 13 hang on restart error comes back. Restarting, selecting windows, F4, F7, custom set the resoltion each time and then after the int 13 hang Hitting g enter g enter gets me back in business though.

[willdenow]

Help. I need the special macmini xom.efi file, but everytime I try and download it, I get kicked to the login/unauthorized page. I've registered and confirmed for both the forum and wiki, but it does no good. What am I missing?

[davidp89@mac.com]

Use Firefox not Safari and it will download

[compufix]

Help. I need the special macmini xom.efi file, but everytime I try and download it, I get kicked to the login/unauthorized page. I've registered and confirmed for both the forum and wiki, but it does no good. What am I missing?

If it helps, my xomhelper application will install the right version of the xom.efi for you, and bless it, as well as allow you to make the CD on OSX.

http://forum.onmac.net/showthread.php?t=362

Let me know if it works for you.

-Compufix

[ttt_Travis]

I can't seem to download the MacMiniXom.zip file, it just asks for password over and over even though I am logged in.

[thebalaa]

login first, then try to download it.

[aimbuster]

Just use Firefox or Camino and the download will work. It doesn't work with Safari.

[phode]

Am I the only one who is unable to download the MacMiniXom.zip file? When I click the link to download it, I get a prompt to login. I login and it asks me to do it again.
Thanks in advance,
patty_b

Had the same problem and tried to get help from all over until I had a brainstorm and used firefox to download it. Must be something with Safari because firefox downloaded the file. Hope this helped.

[SP33DFR34K]

When it prompts for you to login, just press refresh. Viola.